OTUAYAUTO100PCS Plastic Rivet Clip, Replacement for Jeep Wrangler 07-15, Chrysler 300 99-10, Dodge Avenger 08-14, Nylon Fastener

Otuayauto plastic rivets QGZ024I don't put a lot of faith in product reviews any more because all too often the product hasn't been given a serious test, or is a result of a sellers "bribe". This product is an exception and deserves the following review.I used the rivets when I replaced the plastic left front inner fender liner on my 2001 Dodge 2500 4x4. They are a direct replacement for the same thing that Chrysler demands an obscene amount of money for. Getting the old rivets out is easy. I just used a 5/32" pin punch to drive them back from the head end. There is a tool available for installation but as long as you have some reasonable working room around the rivet head you don't need it. I just used a pair of vice grips and a Cat Claw (body man's upholstery tool).First I pre-formed the rivet arms by clamping my Cat Claw in a vice and used the vice grips to carefully pull on the locking rod until the arms were extended. Be careful not to pull the rod far enough to engage the locking serrations. If you do, I think you can push the rod back without doing any harm. By pre forming the arms it makes it a lot easier to extend them when in place.To install them just get the liner in the right position and start wherever you think is best. Push the pre-formed rivet into the hole in the liner and into the hole in the inner fender. Using the Cat Claw put as much force as you can on the rivet head to keep it and the liner tight to the inner fender. Then clamp the vice grip on the locking rod and pull it out until you can feel and hear the serrations on the rod engaging with those of the rivet head. When you have all the rivets installed just go around with a pair of small side cutters and nip the rods off at the head.This product is reasonably priced and works as advertised. Top marks .

Ideal para los trabajos de mantenimiento en casa.. y volver a dejar todo tal y como debe de estar en el carro.

Très bien pour mon jeep cela fait là job.

It fit and worked great thank you

Se usó para sostener la s molduras de un jeep wrangler unlimited 2012.