Campbell Hausfeld Accessory Kit, 17 Piece Compressor Inflation Kit, with Blow Gun, Air Chucks, & Inflation Needles (MP284701AV)

I added this kit to my purchase of a Makita MAC100Q air compressor. This kit includes all of the most commonly needed things to get up and running with an air compressor -- especially if you haven't had one before. For example, you use the 1/4" plug (male) with a threaded female end to connect an air hose to the Makita compressor's quick coupler. Then put a quick coupler (female-female) to the other end of the air hose. Now you can add another 1/4" plug with a threaded male end onto the tire chuck (it has a female threaded end) and you've got one quick connect tool ready to go. The kit includes a total of 4 of the 1/4" plugs for adding more quick connect capable tools such as the included air gun of this kit. So, if you're getting an air compressor for the first time, this is a must have kit. (Note: These parts seem to be of good quality metal and properly threaded, but you might want to use teflon tape on all of the threaded connections to prevent air leaks.)

These are good attachment. The price is good. One thing i did find was. That you have put the Teflon tape that is provided on all the attachment, otherwise they leak. They should provide more tape as the one that is provided is not enough. Other than that everything is working as its suppose. to

the kit has most of the things you need for inflating

the threads on the hose inlet side of the valve looks like it was dropped or something hit the thread edge making it hard to thread in but we got there but otherwise the air flow should be ok for my present needs.

Works pretty well. Used male and female QDC on hose, and two male QDCs for the blower and tire inflator, leaving three spare male QDCs for any other accessories you have (one of which with female NPT threads), assuming you don't need one for your compressor. Air pressure gage is cheap, not sure how accurate it is, but seems consistent at least. Fittings leaked air even after tightening 1/2 and even 3/4-turn after hand tight. Teflon tape resolved that though. QDCs are difficult to attach with high pressure, so be sure to adjust the regulator before connecting them. Tire inflator is a bit awkward, and near impossible to get on my motorcycle's rear tire valve. That may be just an incompatibility with my bike, but something to consider. I haven't used the blower or ball inflator attachments, so I don't know how well they work, but I can't imagine them not working with how simple they are.