EShine Interconnect Cable - Male to Male, 3.5mm x 1.35mm, for LED Under Cabinet Lighting with Wire Clips (10ft, Black)

My wife has wanted under cabinet lighting for some time now. I researched many light sets and decided to go with these eshine lights. I connected up the lights and laid them out on counter and held up the lights under the cabinets to see where they worked best for us, then mounted each light bar with double sided tape and then installed mount screws in each bar. Next disconnected power and all the cables and neatly installed them under and thru the cabinets(I drilled 3/8 holes in four spots of the cabinet to route the cross over cable) which connected the two light bars on the left cabinets across the sink to the four light bars on the right side of the sink cabinets. I neatly ran the power cord to the outlet behind the refrigerator and wha-la....I'm done. Installation took me four hours,because I took my time and performed the installation as near perfect as possible. If I had not been so concerned about the neatness and that the entire system was not visible from standing in the kitchen, it could of been done in less than an hour. Most importantly.....my wife LOVES these lights....she loves the....no touch control....she loves being able to dim and go full bright. To the person researching for under cabinet lighting.....these are great!!! The full brightness level is very bright and white,yet, not overpowering. Highly recommend these lights.

Under kitchen cabinet lighting. Did a lot of research and found most of the lights were thick enough to be seen when we sit in adjacent room. These are extremely thin and can be mounted close to the lip on the front of the cabinet and disappear.I drilled holes between the cabinets and could easily run the connecting in wires. The kit came with plenty of self stick clips to hold the wires up and tucked out of view.I used the included 3M adhesive sips to mount and them drilled pilot holes and used the included screws to assure that the will never come loose. When done they are totally out of view, provided just the right amount of light, not to dim not glaring. Then you can dim them by holding your hand under the IR sensor on the 1st strip.I got the 3000k warm white and it is great, glad I didn't go with the 6000k cool white. This isn't yellowish, just a warm natural light.

The 3ft extensions were just what I needed to connect my light strips properly.. THO, it really needs 3 or 4 clips with it, 2 aren't enough..

Got a white Eshine 20 inch LED light kit yrs. ago and I needed to get a male to male connection cord to "daisy chain" 2 Eshine 20 inch light kits together under 2 different separate kitchen cabinets, in between the stove and the sink.This way I only have to use 1 power cord and wave my hand under 1 of the lights and both lights come on or both go off. Both LED lights look good and work really well.

I purchased a set of the dimmable lights to light the countertops under the cabinets in our kitchen as the regular lights are very bright. I have been very pleased with this product and being able to control the brightness on the countertops at night. The effect of the lights in the kitchen led me to purchase another set for our home office where we do a lot of computer work at night. Just the right amount of light. E-shine offers a lot of different connectors and cords to accommodate any lighting issues you might have. I am very pleased with this product and would purchase more if I could find a use for them. very well constructed, highly recommended.

We used these lights under our cabinets over 3 different countertops all controlled at a single location. The daylight bulbs are very bright, good for task work, and, when dimmed, the result is a very pleasant nightlight. 🌙 With a little drilling in the cabinets, it is easy to put lighting where you want it. Be sure to mount the control module at least 4 inches from the lip of the cabinet as instructed. Otherwise, the dimming feature will be difficult to set.

We always have these in our home under and over the kitchen cupboards. They are beautiful and enough light to just add so much ambience to the kitchen. We’ve put them in 5 houses now.

I needed 2 cables , one to get up around & down an over the stove microwave oven to interconnect the under cabinet lights. The 2nd was to get behind a french door fridge to again interconnect lights. The 10' length was perfect for the microwave as you will need more length than you think. Behind the fridge i had extra but easily doubled back on itself into the supplied clips. Just wonder why the manufacturer doesn't supply female to female connectors for all the 40" connecting wires that comes with the multiple light kits? Very easy and cheap to do!