Can this be applied on Truck bed which has only paint... I do not have professional primer / bed liner in place...

ABOUT TRUCK BED COATING SPRAY Acting as a barrier from rust and abrasion, Rust-Oleum Truck Bed spray provides a durable, non-skid finish that protects both metal and painted surfaces. Commonly used on truck beds, this multi-purpose coating is convenient for application on small surfaces or areas with tight, curved contours that are difficult to brush. It also works great when used as a touch-up spray for existing coated truck beds. Protects surfaces from scratches, weather and fading Textured non-skid finish Multi-purpose coating for truck beds, fenders, step areas, trailer floors and more Rust protection from Stops Rust formula Convenient any-angle spray and comfort tip DESCRIPTION AND USES . Rust-Oleum® Auto Truck Bed Coating is designed to provide a durable, abrasion resistant, textured, non-skid finish to truck beds. It provides a barrier from rust and protects the surface from impact, scratches, weather, and fading. It reduces road noise and contours to the exact shape of the truck bed. For use on bare or primed metal truck beds. Not for use on surfaces that will come in direct contact with heat or high temperatures such as mufflers, exhaust components, etc. Rust-Oleum Truck Bed Coating features an advanced spray system that allows you to spray at any angle, even upside down for those hard to reach areas. A comfort spray tip with a wider finger pad reduces fatigue caused by continuous spraying. PRODUCT APPLICATION (cont.) . WARNING: If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.eps.gov/lead. APPLICATION Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Hold can upright 10-12" from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can in motion while spraying. Remove any overspray from the auto finish immediately. For best results, apply 2 coats, allowing 1-2 minutes between coats. Do not use near open flame. Click the link https://www.rustoleum.com/~/media/DigitalEncyclopedia/Documents/RustoleumUSA/TDS/English/CBG/Automotive/ATO-16_Automotive_Truck_Bed_Coating_Aerosol_TDS.ashx

Manufacturer	RUST-OLEUM
Part number	248914
Item Weight	454 g
Product Dimensions	7.62 x 7.62 x 25.4 cm; 453.59 g
Item model number	248914
Size	15 Ounce (Pack of 1)
Color	Black
Finish	Textured
Material	Aerosol
Item Package Quantity	1
Coverage	100-200 square feet per can
Special Features	Scratch Resistant
Specific uses	Interior/Exterior
Included components	Brush
Batteries Included?	No
Batteries Required?	No

Rust-OlEUm Automotive Truck Bed Coating Spray

Detalles

Descripción

Presupuesto

¿Tienes una pregunta? Mira lo que otros preguntaron

Preguntas comunes