HATCHBOX 1.75mm Black PLA 3D Printer Filament, 1 KG Spool, Dimensional Accuracy +/- 0.03 mm, 3D Printing Filament

This HATCHBOX True Blue PLA is consistent, easy to print with, and produces great results. The color is vibrant, and the filament feeds smoothly with no tangles or jams. Bed adhesion is solid, layer lines come out clean, and it has a nice matte sheen once printed. Virtually no odor and excellent diameter accuracy — a top-quality filament that always performs well.

Fantastic print quality IF you have your printer tuned and you know how to do it (tune) In my opinion Hatchbox is pricing themselves out of the 3d Filament market with a price of $28 a roll for the neo green. You can get same quality from other name brands at a much lower price. This is the reason for a 4 star. Will change to a 5 star if their prices come down otherwise Hatchbox has made me purchase my filament elsewhere.

The color on this is absolutely perfect. Everything about this filament just works. It's durable, pretty, and I was very surprised with the smoothness of the final print without any tweaking or troubleshooting. It has a wonderful orange look that absolutely did my Flexi Skeleton Knight justice. This is an absolute go to for any Flexi Factory model!

The Qidi X-Maker is an excellent printer for 3D printing noobs like me. I didn't want something that I had to assemble for fear that I wouldn't do it quite right, and the Qidi comes very well packaged and is fully assembled. Compared to most other 3D printers, which are quite plain looking, the X-Maker is also quite an attractive printer with it's metallic red housing. Of course looks don't matter if the printer doesn't perform, and the Qidi prints very well. I especially like the magnetic print bed which helps tremendously in prints sticking to the bed properly, and makes removing prints from the bed amazingly easy. I did a ton of research on 3D printing so I'd be as prepared as possible for any printing problems and types of adjustments I'd need to make, and like all 3D printers you need to be prepared to tweak your levelling and print setting every time you change filament. While that has been my biggest frustration in getting accustomed to how to print well, from the many YouTube videos I've watched on other printers, it is just part of the hobby. You are, after all, creating custom objects from what amounts to silly string. :) I've had my X-Maker for 2 months as of the writing of this review, and in that time I've printed over 100 hours as I'm working on an "escape room in a case project" with a lot of 3D printed components. Last week the X-Maker stopped moving in the Z-axis, so I contacted Qidi support in China who got back to me in just a few hours. They sent me some videos of steps to perform to diagnose the issue, and within a couple of days determined I needed a new motherboard, which they sent me free of charge. It arrived in under a week, and they provided a video with instructions on how to swap it out, which was quite easily done. I'm back to printing now and cannot say enough good things about they competence and speed at which Qidi support helped resolve this issue - and from all the way across the world. I've printed with PLA, PLA+, and TPU, and Qidi also claims that ABS is possible although I haven't tried it yet. From the performance of the printer so far, I have no doubt it can handle it with easy. My only "gripe", and it is a minor quibble, is that the print area is comparatively small - the largest object you can print is about 6x6x6 inches, which I think if fine for most users. If you're looking for your first 3D printer, I truly believe that the Qidi X-Maker is one of the best choices you can make.

Using white and blue PLA filament on a dual extruder printer and getting good results. Nozzles 210 degrees C, bed 60 degrees C. Everything adheres well and the results are fine. The 4 rating is due to the spools not being wound cleanly and tightly with each filament lying adjacent to the next. The outer layers of the spool have some overlapping filament. So far this hasn't caused a problem so far but it could. I have bought other filament brands that are wound properly and this one should be too. I notices some other reviewers mentioned this as well. That said I am reordering the white but if anyone from Hatchbox is reading this then get your act together.

My 3d parts come out nice with this color.

Now that I'm on my third roll of this stuff, I feel comfortable writing a review. I absolutely love this filament, and I really don't think there is a PLA that can beat it for the price. There are fancier, stronger PLA's such as Polymax, but they cost over twice as much for a smaller roll. With Hatchbox black, I don't feel like my money is getting flushed down the toilet with every failed print. The finish has an attractive glossy shine, and the material itself has great dimensional accuracy, making for less blobs and zits, assuming that you have a nice extruder/hot end. I have gotten good results with 0.4mm nozzles all the way up to 1mm nozzles with big fat traces. When you print coarse, this stuff is rock solid (by PLA standards). I also have better bed adhesion with this stuff than it's cheaper counterparts. Obviously, this isn't going to replace materials like poly-carbonate for prints that need extreme strength and heat resistance. It isn't magic. But if you want a budget filament that can works for drafts AND final products (for many applications), you can't go wrong with Hatchbox Black PLA. It might be worth mentioning that (at least on my build surface, LokBuild) the bottom will have a matte finish rather than a shiny one. Sometimes peeling off larger prints will leave a chalky white residue on the bottom for some reason, but a few seconds with a heat gun will clear that up no problem. My only complaint is that if you do a lot of sanding or filing in post processing, you will lose that awesome shiny finish. However, I am of the school of thought that if your printer is well tuned and you are slicing your files well, you won't need to do much sanding.

Excellent PLA filament for you 3D printer. Have ordered these several times and been happy with them each time. The print quality is good and they don't tangle.

Una calidad extraordinaria !! Le doy mis 5 estrellas y aquí les resumo por que: ⭐️ Bien empaquetado ⭐️ Calidad ⭐️ Precio ⭐️ Facilidad de uso (perfecta adhesión) ⭐️ Por qué se la merece ! Nada de humedad, no se atora como otros que te hacen un desastre y quedan preciosas las piezas ! Impresión perfecta a 210ºC cama a 60º Aveces lo barato sale caro, no se dejen guiar por el precio, este producto si es de calidad 👌🏻 100% recomendado. Los malos comentarios son de gente que no sabe imprimir 😛

جودة عالية

La calidad que da el filamento es buenísima, incluso hasta trabajar bien bajos parámetros complicados como poca humedad en el filamento, temperaturas muy altas, etc., si asegura la calidad de este material.

Nach den ersten Drucken bin ich sehr zufrieden. Hatte zuvor ein schwarzes Filament eines anderen Herrsteller bei dem sich sehr viele Fäden gezogen haben. Dieses Filament von HATCHBOX macht bei gleichen Einstellungen weniger Fäden. Auch die Haftung am Heizbett scheint höher zu sein, als bei meinen anderen Filamenten.

Hinterlässt oft Blobs und sehr oft einige Layer mit overextrusion. Mit PLA von Janbex, "Das Filament" und REAL nie Probleme gehabt, aber bei diesem trotz etlicher Drucke mit unterschiedlichen Settings nie ein ordentliches Ergebnis bekommen.