RGBZONERGBW LED Light Strip Controller, 4 Channels LED Dimmer Controller, Wall- Mounted Touch Panel Dimming Controller for DC12V-24V 16A RGB or RGB+White LED Light Strip(RGBW)

Great quality easy mounting instructions simplicity and design quality is great

Using on our boat as controller for the 12v LED system I installed. Is inside the glove box, definitely wouldn't leave exposed to elements but it is working great so far! Didn't require anything fancy to wire this way.

As another seller pointed out with the video review, this RGBW product does not work when mounted to a wall. The cable connecting the touch screen to the board will not allow the unit to function properly as it is touching the keys from the back of the display board. I have tried everything i can think of and cannot get it to work. This is very disappointing as I have already cut the wall for this unit. If anyone has a fix, please let me know.

I have to remove 2 stars due to the following:- There are no modes for color fade switching 'smooth' without the light totally dimming out in between colors. All the other controllers I've used can smoothly transition between colors without dimming out completely.- The speed and brightness buttons are the same buttons, so sometimes you dim the lights when you want to decrease the speed -- a bit tedious- The cover is not back lit. at night it's completely black and you have to use a flashlight to find it or operate it. -- EVEN the super cheap RF controllers with the remotes are back-lit.- And by 'adopted glass panel', they mean plastic. It's a plastic cover, probably acrylic or polycarbonate.PROS:-The buttons are pretty responsive. These work fine with RGB lights, but even better if you have RGBW lights.- I like the functions of the single color buttons. You can have one or multiple on.- $20Overall this is a great controller for the money, minus the lack of a few features. Personally, the lack of the features listed above is why I'm returning it, however, my application is very specific. They'd work perfectly for under cabinet or table lighting, but I think I need a higher end controller. I would buy these again for a more simple application.

I bought this to control RGBW light strips for a bathroom I remodeled. The Light strip go underneath the cabinets, along the floor molding, and behind wall mirrors above the sinks. That ended up being more current than this controller could handle, so I use an amplifier too (and a big power supply). Anyway, this review is about the controller.I mounted it in the wall, using a metric box (others have mentioned that in their reviews). I had some difficulty getting the bezel to snap into place after securing the controller in the box, but eventually got it.Some of the controls are not intuitively obvious, so I recommend reading the "Chinglish" instructions... especially about the "mode" operations.The "color wheel" was supposed to be glass, but I think it's just glossy paper or maybe thin plastic- I don't know how long it will hold up to use, especiallyin a moist environmentlikea bathroom. The "color wheel" operates by touch- no moving parts- which is kind of cool, but also a problem in that it is difficult to accurately select the color desired. Fat fingers cover too many touch areas on the wheel...The on/off switch is in the center of the wheel, and I found that it is easy to accidentally touch the color part while trying to turn it on/off. The most irritating thing is that there is an LED in the center of the wheel that flashes dimmly when you touch on/off. It would be nice if the LED could be set to stay on all the time, because it is difficult to find the switch to turn it on in the dark without touching the color area.Example: I wanted to have the lightstrip color to be red, and dim, so I could use it in the middle of the night without lighting up the whole room, but I have to turn on another light to see what I'm doing, or else risk turning on Blue or yellow or almost any other color.Also, the controller doesn't dim the lights as much as I would like it to do.Other than that, it seems to work well so far (I've had it installed about 3 weeks now). Caveat Emptor.

One description says it has six functions. The manual that came with it shows 27 functions. There's no way to know which one you're on. You would think pushing the solid color controls would light up the corresponding color, but it seems to be a random color that lights up, depending on which mode you landed on. Also the color wheel doesn't really match what lights up. Also when I was able to get solid color mode (or any mode for that matter) the brightness control did nothing. It's either poorly documented or malfunctioning, but the end result is it's NOT easy to use. One star for the fact that it's straightforward to hook up, and another for the fact that it does power on.

Not worth the price. The color buttons don't always work forcing you to turn it off to reset the leds. Cheap plastic and bad connections. Overheats leds if you have them on full brightness for more than 15-20 mins. There are better options for the same or less money. Order your stuff from City theatrical or environmental lighting otherwise.

This switch offers great control, and a decent range of 'modes'. I simply wanted R/G/B options, and maybe some shades for fun. Once you get it turned on, it lights up Red or Green or Blue easily and turns them off just as easily. With all three on, it's a warm white light. The color wheel offers some nice blends. My only complaint is the power button. Perhaps it is the location in the center of the 'wheel' but it is very sensitive. While i can 'press' any of the R/G/B buttons or any of the 8 outside the wheel, the 'power' you have to almost 'not touch' to turn it on or off.If you actually touch it, it will not respond. I almost returned it, thinking it was defective, but a CSR assured me it was OK. I may put in a manual 12v rocker just to avoid this.