Should you use fabric reinforcement tape with this? Like is recommended with FlashSeal?

Are you talking about the mesh material. First cut your pieces or have a pair of scissors I find her easier to use. Get a cheap paint brush take your time paint above flashing onto the brick above the flashing and lay the mesh over. You got about 10-20 seconds to play with it …after that she gets hard to work with, and you’ll make it look worse. If you need to do a second coat wait until it dries then go back and put a second coat. If you try to go back and add more before it’s dry you’ll just mess it up. This is the type of information it takes years to acquire through trial and error. if you don’t do it right, it’s a pain to remove and then you’re really getting into a sticky situation. So recap. Depending on the size of the chimney, and I would do med/ large sections at a time. I have your pieces ready put your first coat on lay you mesh pieces and make sure you put your second coat thick enough that you can’t see the mesh.

Desertcart Logo

Join PRO & Unlock Exclusive Perks!

Descargar la aplicación

Fuidamos elementos de

EAU
UK
India
EE.UU
Japón

Servicios al cliente

Sobre nosotros

Soporte al cliente

Nuestras Otras Marcas:Hewyn|Selfship

Reseñas

G**G

Good product.

Sealed the flashing around my chimney as advertised.

13.07.2025

N**R

Chimney sealer

I thought this product to be on the pricey side but I had a leak around my chimney for a few years and tried just about anything Home Depot had to offer. Not only fixed my leak, It worked on my leaks I had on my metal roof as well.

26.05.2025

K**E

Works great!

Very easy to apply and is thick enough to full in holes/cracks. I used it about 6 months ago and haven't had a leak since!

23.04.2025

V**W

Roofing is hard worker

Hired a roofer instead

30.04.2025

M**K

SO FAR SO GOOD

This stuff seems phenomenal , I applied it [ Colorado ] we have had a very wet 2023 Summer , now it [ October ] seems like a drought again . Go figure ... however after EVERY storm this year [ by the way , I did the flashing on my chimney ] it has been soaked and getting to my cinder block foundation . This is not good . Anyway , after this last heavy rain , I looked , behind fireplace ... perfecto ! This stuff sealed my chimney base , so far so good and it applies very easily .The application is VERY easy , it is water based , dries like oil based , that is seems strong , not lingering wet .By the way , other reviews say the paint brush is shot afterwards , not if you wash it pretty soon after application , it is acrylic , so it washes away . Mine did ... so far so good , we will see next Spring . I think it's a winnerThanks

11.10.2023

D**S

Works great and looks great

Works great. Plugged a small leak around the chimney.

8.02.2025

J**!

Crown coat

The only way to properly do a crown coat is to tape off the area because the stuff is like tar and once you put the coat on, there’s no going back and touching up until it fully cures. If you go back and touch it with your paint brush trying to fix spots it’s just going to get worse and worse and worse. Wait until it dries and go back into a second coat. Yes it’s a messy job but it’s a quick cheap fix. Use a wire brush make sure you clean the crown before you apply insure a good seal. The product itself works great. They should be paying me for such a great review, but it’s the truth.

24.01.2023

J**N

Excellent

This works extremely well how long it lasts I don’t know, but I’m very happy with the product so far

14.11.2024

Manufacturer	SaverSystems
Item Weight	5.35 pounds
Package Dimensions	6.97 x 6.69 x 5.2 inches
Batteries Included?	No
Batteries Required?	No

Chimney Flashing Sealer

Descripción

Presupuesto

Reseñas

Preguntas comunes