eXtremeRateFirefly LED Tuning Kit for Nintendo Switch Joycons Dock NS Joycon SL SR Buttons Ribbon Flex Cable Indicate Power LED - Violet (Joycons Dock NOT Included)

The media could not be loaded.  Simple and clean packaging when they arrive in the mail.Seamless design for the original joy-con and dock for nintendo switch.Utterly vivid LED experience. When you slide them into a grip that has exposed lights you'll really appreciate this MOD.I love what I bought. Get em, try Red and make a review as well.

I have purchased the set and this is my review on the LED kit. I went into the entire project blind and used my knowledge in electronics to carefully reverse engineer the console and perform this swap. Take your time (it took me 4 hours total) or find a shop or friend to do this for you. That being said, if you just plan to swap your LEDs and nothing else, there is an easier way to do it.When taking the Joycons apart, once you take the 4 main screws off and separate it, you can use your spudging tool to carefully lift the plastic piece holding the ribbon cable for the LEDs off and remove it, replacing it, just do it in reverse.If you're doing a shell replacement, you can do this step just about any time. Easiest when putting it back together and you have access to the circuit board under the battery compartment. When disassembling the joycons, do not under any circumstances take any other ribbon cable off. Transfer the guts as one piece carefully. See my matching Switch and Joycon Review for this kit for more tips.Dock is pretty easy, that was my first tackle in doing this job, if you see a screw, take out the screw and work your way in. When removing Y screws, use as much force as you can and use small movements when turning the screwdriver. This kit came with the nice gold multibit driver which was great to use, but you will need the small one to remove the screw on the bottom right after you take out the circuitboard.The LEDs are nice and bright but the diffuser of the Switch didn't make them annoyingly bright like if you put the Joycons into the comfort grip, they won't blind your face.Do the work for the entire project and you'll be satisfied with the results. I'll also have reviews for the Switch and Joycon set, and the Dock set, just look for the pictures above to find the review easily!

I bought the lights and controller shells a while back. They are holding up well and I am happy with them. I will say that unless you have a little bit of exp working with electronics like this it may be a little hard to swap them but nothing you shouldn’t be able to figure out. But if you’re buying these then you probably already know.

The media could not be loaded.  Installing these led light was super easy! The video tutorial is on the seller’s YouTube page and these lights are super bright and beautiful! Highly recommend.

I had ordered my leds however, I had to send the kit right back due to the left joycon leds being missing. I did receive a replacement with all the proper parts and installed the lights within maybe an hour or two(I am not experienced in modding or repairs.) These lights are awesome, super bright and everything worked perfectly, shipping didn’t take long, either time I received them, fairly easy to install, though my hands aren’t very steady, so I had some trouble with connectors. Overall, an awesome product!!

Kit really needs a y00 for the tri-screws. Anything larger will strip your screws. Get a kit with y00. This kit doesn’t contain it but has other helpful tools in it.

For the inexperienced, set aside at least an hour.Press firmly while removing your tri-wing screws or they will strip out the heads. Don't blame the tools.

I could not be happier with these. The video extremerate made walks you through the whole process and shows each step clearly. I've replaced the joycon shells before (using the basstop ones in the picture because I didn't know extremerate made them) so the joycons were easier for me personally. The video was a huge help for replacing the dock though and made it super easy to install and was pretty neat to see inside (albeit just a green PCB with a ribbon cable).And a bonus is all the extra included screws in case you strip any of the ones already in the system.The lights are a bit brighter than the stock green ones, but that's not really a bad thing, just a note.10/10 would recommend (wish I could have bought a red/blue pair though instead of needing to buy a full red and a full blue kit)

Well made - I bought the Pink ones for my Atomic Purple JoyCons as I had a faulty ribbon cable in my SNES pair - there's no Red/Yellow/Green/Blue LED strips. Installed the new pink ones and used the spares to repair my SNES JoyCons. The new ones are significantly brighter than the stock LEDs.If you're looking at this product, you've no doubt already replaced shells or analog sticks. The LED SL/SR strip is easy by comparison, requiring the removal of only two screws and one ZIF connector.

Fairly easy to install, and this saved me from ordering replacement ribbon cables from Ali Express since i broke my originals while trying to replace the joystick. First thing I noticed was that the LED's themselves are very bright, and sorta shine like a spotlight. I prefer subtle looking lights so even though the colour is nice I find the brightness to be distracting.I don't know if the brighter looking LED's would have an effect on the battery life of the Joycon so it might be something worth keeping in mind.EDIT:After 1 week of use I haven't noticed any particular battery drain. LED's are still too bright for my taste however.

This item could gave been great and I would have given it 5 stars. However, the little circuit board for the switch dock was back to front, meaning that the led light had to be inserted the wrong way in order for it to fit. This has resulted in a very dim light on the Switch dock which doesn't look great. The SL SR leds are very bright and look great.

Works fine installed in a couple of minutes

It didn't work when I got it one side worked but only one button