Orion Motor Tech Camshaft Alignment Tools, 3pc Cam Timing Belt Tool Set for Ford Mazda 2.0L 2.3L 2.5L MZR Duratec Engines, Timing Peg for 1994-2012 Ford Contour Cougar Edge Escape Explorer Focus More

Worked great 2008 mazda 3 2.0L

as tempting as it may be to torque your cam gears using the provided bar to hold them Don't do it. There are hexes machined into the cams made for you to put a wrench on and hold while you're torquing the cam gear. If you use the bar your going to end up ever so slightly out of time. note that the crank is not keyed. the timing gear on the crank is not keyed. The crank pulley is not keyed. All of these have to be timed. Use the bolt hole in the crank pulley to hold the crank pulley in time. Use the tools provided to time the rest. This is important because your crank position sensor sprocket is mounted to your crank pulley. If the pulley is not put on in the correct time the ECU will not be able to accurately detect where the crank is at in its stroke. USE A CRANK PULLEY HOLDER TO TORQUE THE CRANK PULLEY BOLT - DO NOT USE THE CRANK TIMING BOLT. -I speak only from experience and not from high stop some expert mechanics pedestal. Learn from my mistakes rather than repeating them. I will say I am very familiar with this job at this point. -do all of these things and you will avoid taking the engine back apart 3 times like I did. A+ timing tools.

Excelente

Worked great on a '06 Mazda Tribute 2.3L

Package was good but the tool is bended Maybe I got a lemon but don’t wanna take chances for another try. Returned

I had to get a job done. The tool was the key and it was done effortlessly. Thanks!

Great set for the price, works well. Fast shipping, I would recommend to anyone looking to change timing set.

Flywheel locking tool for the Ford 1.6L engine broke in half on first use. After inspecting the tool, I noticed the threads don't go deep enough into the 1.6" locking key and the break happened exactly at the end of the threads. It needs a washer to prevent the bolt from bottoming out into the threads. Bad design but easily corrected with a 5-cent washer. Would also be helpful if they put the Ford tool part numbers on the information sheet that is in the kit.