Cooler Master NR200 Mini-ITX PC Case Ready, Horizontal GPU Mount, Designed Ready Nvidia RTX 5070 Ti | AMD RX 9070 XT, SFX PSU – Ready to Install, Airflow Up To 6 Fans, Vented Panels, DIY

I was extremely lucky to stumble upon this case while looking for a Mini-ITX. It's made of durable, good quality metal that's heavy (but not too heavy), small with a lot of room, and extremely versatile (just about every panel of this thing comes off without any tools - just need a screwdriver for the top and bottom panels). It's pretty much perfect for both experts and first-time builders who want a smaller compact PC. This was my very first time building my own PC, and despite it being inside such a small case, the NR200 made it extremely easy to install. There are tons of places for cable management ties with unlimited potentional for different layouts. The case also has so much airflow that it cools the case extremely well. You also can't beat the price either - it's comparable to a Ncase M1 (but slightly bigger) while being less than half the cost. There are only a couple issues that I ran into: - The backside of the case does not have a lot of room to run cables. Not a deal breaker (it was still very doable) but you'll need to strap down the cables on the backside as well in order to get the panel to shut. If it had just another half inch it would be perfect. - There are many mixed answers on this, but the version without the riser does NOT come with a glass side panel (or at least mine didn't). If you want a see-through side panel, you'll have to opt for the PCI riser version. Overall I'm extremely happy with this case, it made my first build in a Mini-ITX case very easy. My PC runs very cool and there's lots of room for expansion once the 20 & 30 series cards drop in price again. My build: - AMD Ryzen 5 3600 - GeForce GTX 1050 Ti 4GB - Team T-Force Vulcan TUF 16GB 3200MHz - 512GB M.2 NVMe Boot Drive w/ 2 500GB 2.5 SSDs - Gigabyte B550I Aorus Pro AX MOBO - Corsair SF 450 Watt PSU - 3 x 120mm PWM Fans

Really easy to build in. Lots of space while still being a small form factor case. The metal chassis is sturdy and the weight is not to heavy. I love the minimalistic look and how little space it takes on my desk.

Seriously one of the best ITX cases you can buy for the money. If you don't care about RGB puke and just need a great looking, SFF case for your hardware but dont want to spend $200 on a Fractal case (with worse airflow), then this case is for you. Fits my full sized 9070XT and 6 120MM fans. GPU temps under full load are UNDER 60°!! That is INSANE for a SFF case. CPU temps stay under 70° under sustained full load. I cannot recommend this case enough. Its such a breathe of fresh air to have a company not put a ridiculous markup on a product just because its SFF.

I love the look of this case. It fits a triple fan rx 7800xt GPU with room to spare. Cable management room is a little tight, but it can be done. I recommend running extra power cables around the power supply cage. I also like the way the SSD attaches inside the front panel. The back of the motherboard is accessible, so it is easy to get to any m.2 slots you may have on the back of the motherboard. Plenty of ventilation all around the case and screens that can be removed to easily clean the dust. Everything runs nice and cool and quietly inside this case.

I purchased this case when it was on sale for a mini ITX PC build that I wanted to do. I got this case because it was the best version of the NR200 despite being a few years old. Overall, I enjoyed building in this case. All of the provided components, such as panels, screws, motherboard connections, and fans, were all quality. The case layout was well thought out, specifically the location of the power supply. Being able to take apart the frame of the case is very convenient and helpful and is a feature I wish more cases had. Also, there is a part of the frame under the side panel that you can mount fans to. This is something that I have not seen a lot (have not done too many mini ITX builds), but was a nice feature. On the side panels, there is a magnetic mesh cover that you can remove too, another great feature. There are a few things I don't like. The first issue is the location of the power cable extension. Because the power supply is mounted near the front of the case, there is an extension of the power cable to the back of the case. The problem that I have is the location of this extension makes it nearly impossible to secure the motherboard in the top left corner using the screw. Furthermore, the extension cable is also nearly impossible to remove in order to actually secure the screw. Another problem I have is the lack of cable management options. I know it is a small case, but there are very few places to cable manage at all. This isn't a problem for me, but it is something to consider - there are no USB C ports on the case, likely because it is older. I liked the case, I liked building in it and what it offered. There are a few problems for me, but I would absolutely build in this again and would recommend to interested buyers.

This case is awesome and cheaper than its main competitor the NCase m2 and others. Great features for cable management and accepts most air coolers. I have a D12L in mine and the temps are great with having vented side panels that snap in easily. Comes with dust filters and top I/O.

great case quality. sturdy and extremly well ventilated.fits a asrock 9060xt easily.went with the 850 watt coolermaster power supply.arctic freezer 3 pro 240 and a asrock z790m-itx wifi board with a i7-14700 cpu.excellent build!the case has many options for power supply mounting.and multiple case fns if needed.i cant get over the sturdy thick build quality of this case.the case is a little bigger then i expected.but flows air well for high end gaming builds. cable management is well hidden for a clean look.i like the dust filter on bottom of case for easy clean up when needed as well.

I recently built a system in the Cooler Master NR200, and it was easily one of the smoothest PC builds I’ve done. The case strikes a perfect balance between compact size and accessibility—small enough to fit just about anywhere, yet thoughtfully designed so every component is easy to install. The tool-less panels and clever internal layout really made the build process stress-free. I also appreciate the little details that set it apart, like the included power cord, which adds convenience right out of the box. Overall, the NR200 is a fantastic case for anyone looking to build in a compact form factor without sacrificing ease of use or thoughtful design. Highly recommended!