UlincosLatching Pushbutton Switch U19C1 1NO1NC SPDT ON/Off Black Metal Shell with Blue LED Suitable for 19mm 3/4" Mounting Hole (Blue)

Purchased this switch along with:Ulincos NOT FIT U19D1, 19mm Pigtail, Wire Connector, Socket Plug for U19C1 Push Button Switch (Pack of 2)for an install of a switch to my 2018 Silverado's bed lighting. I made my own wire harness bundle after the pigtail described to reached my application. In combination with the pigtail connector mentioned, install is easy and looks great. Time will tell how this all hold up since this is located in the bed of my truck, but I will say that the bed does have a tonneau cover on and does not leak water - at least none that I've ever seen.I also like the fact that there are several colors to the LED to select - this could be great not only to use your preferred color, but also if you have more than one button need in the same location and you desire to color code your buttons in addition to or instead of labeling them.

Installed this on one of our custom builds! The light switch is perfect and fits flush. It's also not TOO bright for nighttime where it would shine in someones face and become a nuisance, it's perfect. Time will tell if it's great for long term, but so far so good! P.S. It did take a little while for me to figure out how to wire it in a way that the light would always stay on regardless of on/off position, but I was able to figure it out. Would be a plus if these were sold with a relay already wired to it so you could then just connect your (+) and (-) to 12 volts. It would be the best light switch out there if that could be done and come ready to go ;-)

Ulincos pushbutton switch was installed last night on my motorcycle to turn on driving lights. Mine is black with a light blue glow when on. The plastic body blends well with the fairing plastic color and has a minimalist appearance which is what I wanted. The blue light is not too bright thus obtrusive on the motorcycle. It is working great so far and I hope it will continue that way. The wiring was a bit complicated as the orientation of the connectors was not as described in the diagram on Amazon. I used my logical instinct and gut feeling at first and low and behold, both were incorrect! I subsequently followed the instructions and paid attention to the proper label of each connecting pole. Then it was magic and the universe came back in harmony. All good now and I recommend it. Be prepared for some initial drama which is always healthy.

I bought this when installing an amp into my car. The switch itself feels just a big lightweight and cheap, but it holds up just fine. The pain-in-the-butt was actually figuring out where to install it in my particular car semi-permanent but without altering any major parts of the car. That ended up being a small button panel in the center-dash, but then that panel had a circuit board even behind the blanks. Thank God the circuit board ended with JUST enough room for me to dig a hole through the contraption without breaking anything important, and squeeze this switch into place.But that was my car's fault, not the switch :-)Besides that, it's really bright, and I'm considering putting a resistor on it now (I thought it'd have one built-in). You can also see the LED right through it, the lighting isn't evenly spread. But still very effective. And customizable.The wiring schematics and usage examples are very misleading too, if I recall. I think it had a typo or mess-up somewhere, but I ended up throwing that away and just going by the labels on the switch itself.

Works great using for extra power outlets in my SUV, and it gives me the ability to turn the power off when not in use!

Great little switch. Better construction that I had expected. Comes with a small rubber o-ring and metal nut, unlike the cheaper ones. The instructions in the package are confusing- use the picture on Amazon. It's nice that the package tells you to drill a 3/4" hole for mounting. The pins on the back are VERY small. You will have to either solder small gauge wire to them (not fun, but what I did) or go out looking for xs female crimp connectors for it. It would be nice if the connectors were included! If you've never done any wiring or soldering before, this may not be the switch for you.

Great little switch. Illumination is surprisingly bright. The only down side is, make SURE to get the socket/plug with harness if you want trouble free installation. If you have a solid understanding of 12v electrical systems you can certainly get by without the plug but it sure helps. I've installed 4 or 5 now for various accessories & all have functioned as advertised.tt

Dont miss to purchase the socket adapter for it. I end-up soldering into the leads. Then i end-up accidentally broking the pins :( i was no able to repair it.

I rarely leave reviews... but this switch is simply amazing. (I can't believe I am raving over a switch). I replaced an older rocker switch with this one and the pigtail wire connector and socket. Installation (after i confused myself with the mirror reverse on the connector) was about as simple as it gets.On top of that the switch feels rock solid. For its size it feels very solid and the push button mechanism feels very strong. The light and different connection methods make this switch a perfect solution for anyone.

while I'm not sure how weather resistance this design would be, the button feels well made, the LED is bright and looks good, and the included wiring diagrams are accurate and easy to follow.

works great, and pleasing to the eye. don't get it TOO wet though. Put it on my motorcycle but shorted in the rain through the front (back was sealed). ended up drying it and installing a clear rubber wrap over the front of it... good to go now!

Looks beautiful once installed. It is a sleek.

The tabs in the back are long and flimsy. You get what you pay for.Been through some rain and car washes and still working fine!Red light is perfect brightness when lit. Button size is good for pushing.