eXtremeRate Grip Classics SNES Style Console Back Plate DIY Replacement Housing Shell Case for Nintendo Switch Console with Kickstand – JoyCon Shell NOT Included

Very easy to fit and good quality! I changed the joycon shells which was quite fiddly, then I did the back to match which was a lot easier. Quality of the plastic feels good, that nice soft touch plastic

Plastic is almost soft it seems and feels incredible. Easy to install if you know what you’re doing but highly recommend you get a dedicated tool set or you will stripe your screws. Kick stand is very good and isn’t breaking at all after 3 months. Definitely recommend

Very good quality, extra screws were provided which helped along with the screwdrivers. if you're going to do this especially changing over the joy-cons please take your time it will take about an hour or two to do the joy-cons and about 30 minutes to do the back plate. go slow take your time and you'll be able to do it don't rush or else your mess up and have to buy new joy-cons. Check YouTube for tutorials and don't over tighten the screws as you will round the heads off. Best thing to do when unscrewing is to turn slowly applying pressure on and off so you avoid rounding heads off

Very easy to install, and combined with the custom Joycons gives my switch a great new look.Particularly impressed that extreme rate include spare screws and the screwdrivers required to perform the installation. Great customer service.

Easy to install but be careful when undoing screws on switch use rubber band trick

Good product easy to swap over my son is over the moon with it

Easy to install. Just take your time and watch the YouTube videos.

As far as aftermarket shells for consoles go, the quality is pretty good. It has a rubberish feel to it and fits nicely in place of the original backplate. The main issue I have is it is easy to mark. After putting my Switch into a its case a couple of times, the shell has a long black mark across the top and the centre of the shell. This isn't something that can be wiped clean; the paint or finish has come off of the shell.

He de decir que el diseño se ve incluso mejor en persona que en fotos, si deseas darle una nueva vida a tu Switch original, por cierto quizá los destornilladores que trae incluidos pueden no funcionar y recomiendo comprar otros aparte para no barrer los tornillos de la Switch

Pardon the awful contrasting color scheme in my picture, but the back plate itself looks great!Installation is a matter of being extremely careful with keeping the very tiny screws of the switch organized. I used the provided plastic case as the hold for all the tiny screws and just arranged them as I was taking the backplate off to orient to where I had removed the screw. This did not come with any instructions, but I feel like it is straightforward enough to not need them. All in all, I think it took about 15-20 minutes to complete.I didn't end up using their screws provided, I opted for using the original switch screws. But it does come with all the little screws. The only thing it doesn't come with that you need to keep from the original back plate is the cartridge flap assembly and the internal kick stand pieces. It comes with the kick stand, just not the pieces to hold it too the case.It also comes with a awesome little screw driver set for small phillips and tri-wing. This is perhaps the only thing I think could be improved is that the screwdriver was not magnetic. Because those little screws are extremely small, so you have be extremely careful not to drop them. I found that holding the screwdriver vertically pointed upward and then bringing the switch to the screw was the least risky way to guide the screw to the hole. This way you are not tilting it for the screw to drop, and you are not able to drop the screw in the switch itself.One nice feature about this is that aside from looking absolutely awesome, it has a nice softness to it. Hard to explain, it's not like completely hard plastic feeling, and it's not squishy rubber feeling, it just has a very slight smooth rubber coating. It feels nice though.

Easy to swap, just take your time and look up a video.Remember to water your switch daily to keep the wood growing, it will then begin flowering beautiful blossoms in the spring.

The media could not be loaded.  Tenho duas switchs, sendo uma original, e a mais usada a oled.Esta presentada no vídeo, com o produto instalado, está sempre na docka para jogar na televisão, sendo o modelo original.Estava a sobreaquecer, e um dia vi cair um resíduo de lixo na grelha, de onde sai o ar.Aproveitei que ia meter uma nova pasta térmica e limpar poeiras/ lixo, para a tornar em algo mais divertido, sendo-a faz mais de 5 anos, não fazendo sentido estar apenas arrumada.Textura suave, provável arranhar quando meter na dock, mas essa também pretendo fazer um mod da que veio da switch original, estando apenas arrumada.Noto ainda a aquecer, mas pode ser por má aplicação de pasta térmica, no qual não acredito, ou de não trocar a que está em contacto diretamente com o chip, sendo um projeto um bocado suicida.Possível também notar mais quente, pelo plástico ser de qualidade inferior em comparação à parte traseira da original.Ou ter que dar umas horas/ dias para a artic silver 5 assentar.Pelo que sei, sempre aqueceu mais, em comparação com oled.Primeira vez que faço isto numa handheld. Apenas restaurei uma ps3.As chaves são apenas um bónus, não são o produto final, dificultando a vida por falta de magnetização e nada ou pouco as usei. Tenho melhores.Também agradeço os parafusos, que não precisei. Mas acredito que só eles valham pelo menos metade do preço do produto, guardando-os, caso alguns fiquem moídos ou ferrugentos.Resumo: Para mim, perfeito!PS: Para quem usa a kickstand, esta parece muito mais presa! duvido que algum dia caia, em comparação com a original, não sei explicar a ciência de como.

Contiene herramientas necesarias para cambiar el caparazón, muy buen producto. Recomendaría ver un tutorial de YouTube para poder hacerlo bien y sin problemas.