K40 K4018FME 18ft Super Mini-8 CB Antenna Cable with Removable FME Connector, Black

Summary: Excellent value; removable tip made installation easy. While repositioning the CB in my Jeep, I accidentally twisted the end off my previous antenna cable. I started looking at trusty Amazon for a replacement, and discovered that you can get a cable with the FME connector that's removable. Wow! I thought. This will make my new antenna location much easier to install! Sure enough, since I wanted to route the cable outside the Jeep to the new location just above the driver's side taillight, thanks to the slender tip I was able to thread it through the taillight via a hole I drilled, behind it into the body under the wheel well, out a pre-drilled hole in the wheel well into the cab, up the roll-bar, etc etc etc. (Note: make sure you don't kink or bend the cable as you thread it through your cable path.) Threaded the end back on, hooked up the CB, and my unit works perfectly, after..... Another note: make sure you have a proper ground surface on the antenna mount and on the correct side of the stud. I bought this stud from Amazon, http://www.amazon.com/gp/product/B0002HRBSU?redirect=true&ref_=cm_cr_ryp_prd_ttl_sol_12 and it worked great, but only after I realized that I needed to strip away paint on the bottom side of the mount. The nylon bushing goes on top of the mount, net the flat washer, next the split washer. The metal stud should make unpainted metal contact to the underside of the mount; if not, you will have crazy high SWR readings. Once that was squared away, the cable could perform excellently as it was designed to. Quality of Materials: * No issues. Cable and sheathing look to be high quality. Quality of Fabrication: * Everything was put together well. Ease of Installation: * No problems. Take your time, don't kink or bend the cable, don't neatly coil the excess, just loop randomly under carpet or up top. Suitability for Purpose: * Once I got the grounding issues resolved, has worked flawlessly. Would be nice if it was black, so that the 8" or so that show outside the vehicle would be a little less conspicuous, but not really a big deal. Packaging/Delivery: * As usual, Prime delivers fast and delivers well. Cable was coiled nicely, so nicely, in fact, I had to stretch it out to work the coil loops out.

I have used this coax for various applications, quality is good,not very stiff. Very functional for auto or truck use.

Work very well to run in tight place... was able to run it where factory cable ran on mack truck.. good quality cable to r8x.. runs with my general cb with low swr.

I love these cables. They're super tough and very robust. The weatherproof boot on the one end is great and does an excellent job sealing the cable end from water. The removable connector on one end is very convenient for passing through grommets and really helps to make the install process easier and cleaner. The hardware is well finished and high quality, and they work better than any cheap CB cable I've ever bought. Definitely would buy again.

This product is well made and is a good value. It made setting up my radio and tuning my antenna all that much easier.

*Review Update*: The mini 8 connector has a tendency to vibrate loose over time and when it does SWR goes all over the place. I've tightened it down with a pliers more than once now and it does seem to be a recurring issue. Still good coax, but definitely something to watch for! Very high quality coax! Used it for my CB set up and have absolutely no complaints!

i am very happy with this product so far. very easy to install and i like that it has a weather proof boot on it. Update: I just bought this item again after 3 years since the first one only because I didn't want to mess with pulling it out of my old bosses truck into my new one. I am still very pleased with this item and how easy it is to achieve a nice clean install. I have had no problems with high swr reading and both orders arrived in good condition and shipping was fast.

Is as described extremely fast shipping .

De buena calidad y estaría mejor si estubiera un poco más largo pero de buena calidad

The FME connector made it much easier to install. The quality of the cable feels really good. So far seems to be performing well. Don't forget to calibrate your antenna.

Very easy to run into the cab with the smaller end. Very sturdy and clean design. Lasted 2+ years in weather of all kinds.

Bien contant malgré une crainte au déballage le était plié plus que nécessaire mais il fonctionne très bien et la facilité pour passer dans miroir et porte de camion est très apprécié

This product was fast and easy to install with the end connector that’s removable!! And CB Radio works perfect!!