StorageTekPro Flashed Original LSI 9211-8i P20 IT Mode for ZFS FreeNAS unRAID 6Gbps SAS HBA

Plug and play with Windows 11, no diver or software install needed, recognized both of my drives with no issues.

Worked flawlessly and verified flashing was legitimate to the latest version compatible with Unraid 6.x

I used this card in unRAID to add support for 8 HDDs in IT Mode. Did not have to change anything or do any setup. Card recognized first boot, unRAID found the four drives I have and everything worked ! Card comes flashed to IT mode so it’s perfect for adding 8 more hard drives to whatever you are running...Often you hear about fake LSI cards, the one I received says LSI in all the right places so it looks 100% real to me !

Just as described. I use it for my HP Proliant DL380 G7 server.

I run a Proxmox hypervisor and this card is attached to 8 drives for storage on my network. The card it replaced I got for $30 on eBay. I can tell by looking at this, it is a genuine LSI part.My hypervisor uses ZFS to manage storage volumes/arrays, and the old card gave AER errors that would flood my syslog and when I connected this card, all the errors went away. Like magic, this just works.I wish I bought this in the first place. This was entirely worth the $80 paid to enable SAS on my server without errors.---------------------If any of you are still reading, and might be curious...I have 3x HGST 4TB drives in a ZFS stack (RAID 5) for an effective 8TB storage with 1 failure.I have 3x Seagate 12TB drives in a ZFS stack (RAID 5) for an effective 24TB storage with 1 failure.All refurbished drives because I'm pretty budget conscious.

I used this to add more hard drive controllers to my motherboard. I have a Plex media server setup and needed to go to 4 hard drives. I found that one of the ports on my mother board did not work. Bought this expander and moved the drives to it and it fired right up. I have 4, 14Tb HDs in my system currently but the system has space for 8. I doubt I will ever get there but this card should cover what I need. I consieer this a good purchase.

Worked good, could have had instructions..I tried the wind slot first.

I don’t review many products, but in this case I’m happy to since people looking for a card for Unraid or other builds will want to make sure it is shipped in IT mode.Installed and recognized automagically in my Unraid box, letting me grow from the 4 sata ports on my ITX board to 8 in a larger NAS case.