VEVOR Rotary Table 8Inch Horizontal Vertical HV8 Precision 3MT Milling Drilling Machine Vernier Reading Milling Drilling Boring

Great product, but it has issues. Operation is smooth with minimal backlash. T slots are slightly undersized, 13.5 rather than the 14mm in spec. Furnished alignment lugs are over size and did not fit mill t-slots or groves in bottom of the table, requiring some work. Slots in vertical mode are oversized and lugs are loose. When set at zero degrees table T slots do not align with X/Y or at a 45 degree requiring extra work to align work piece. Having layed out these issues I would recommend this rotary table for home shop use

Fast safe shipping. Very good price to quality ratio. Razor sharp edges everywhere. My diamond files instantly corrected. The machining & table are very accurate.! The action is smooth. Desired Vertical & horizontal positions to secure to any table. Convenient MT2 center bore. Able to add accessories like MT 2 chuck or live center

I ordered this product unintentionally but thought it was the correct one so I cleaned it up and checked it out getting ready to put it into service on my small mill. After realizing it was 8 inches and not 6 I decided it had to be returned and the company was very cooperative. First class service. In looking the unit over I thought it was well made, operated well, the markings were easy to read. The manual needs to be improved. The photos are poor and the diagram hard to read. The rotary table is massive. It weights about 50 pounds and it’s hard to lift above your waist and onto a mill table. If you are going to take this off and on a lot you may want to think about the weight. I can see this rotary table would be excellent in use because that weight would be useful if it is going to stay mounted. All cast iron so a lot of unwanted vibrations would be removed. The stability would be great. Once the table is locked down I don’t think anything could move it. AD2

This rotary table can not be beat for the price. The fit and finish were more than acceptable right out of the box. I did have a problem with the micro dial being etched in the wrong direction. Contacted the sellers customer service and they are shipping me a replacement part. Great tool, great price and great customer service.

Overall , this is a good buy (upfront) .After taking it all apart and cleaning , I was very happy to see little debris or even filth in the lower body . The table was clean ! NOW ... let's get to the quality of the less considerable areas . Look at this picture of the on/off switch lever. I mean "come on engineer/designer " !!! AND , the quality inspector/assembler , must have been drunk that day !! Maybe the part was loaded into the laser engraver backwards, but , why install it at . Maybe the wording "ENGAGED" would have been enough ! One of the small screws from beneath the table has been tapped thru the T-nut channel and will have to be removed / ground down for the T-nut to travel freely ! Dial slop is 22 deg /BAD !!!!!! I see no way of adjusting this . Any slight adjustment of shaft nut will only put a bind on dial rotation . The cap cover behind the on/off selector, if tightened, will bind dial rotation also . Let me know if you have a solution . If buying this from a store , I would have chosen another !!

Product of high quality, delivered very quickly and packaged well. Very heavy and larger than what my mini mill can handle. I am returning to purchase the smaller 6”, which will work better.

SO FAR BEST DEAL I MADE

So far everything checks out, BUT. The manual is total crap, in fact it looks like a poor photo copy of the original, it is black / white and you can't make out the parts. That being said, VEVOR has one on line and it is not much better. It's poorly written and explains nothing. Open the box and throw the manual right in the trash. OK, now for the unit. It's a rotary table, it goes round and round, it has one set of gears and one thrust bearing. As long as the top stays level with your machine and you can read the graduations on the dial what else is there. Yes it is machined nice, yes you have to take it apart and clean it. mine came with more backlash then i like but i haven't adjusted it yet. The manual is real vague on the backlash adjustment so your on your own on that one. I found a few videos on line but i they are done by guys that i think are carpenters, they only take it apart part way and do not address the backlash issue, it's like tuning up your car and changing 1/2 the spark plugs and not changing the oil filter. They check to see if it turns level, but did not check to see if it was turning true with the cutting tool ( concentricity ). You can adjust with shims for level. Now, $180 bucks for an 8 in. rotary table, i think i got one hack of a deal. Oh, the manual talks about a metal ball between two set screws, if u lose the ball don't worry about it, a lot of old machines used double set screws with out the ball. For that matter you don't meed double set screws on a hand crank.