LDK Electric Soldering Iron Kit 60W, Adjustable Temperature with 5pcs Different Tips, Desoldering Pump, Stand, anti-static Tweezers, Solder Tube, Screwdriver, Cutter and Carry Bag for Repaired Usage

This cheap little iron has big performance! I use it for RC soldering work, and I have 1/8 scale vehicles that require 10ga wire for several hookups. This heats up a 10ga wire like it's nothing. I'm sure there are even better options out there but imo this cannot be beat for the price. Throw away the solder that comes with it if you're planning on doing electrical connections. Use a quality leaded solder, and probably get some extra flux just to be safe. I use cheapo flux from Home D and it works fine for my purposes. Again, I'm sure better options are available but this works for me. I've had this iron for about a week and I've done 6 xt90 plugs with 10ga wire and 2 trucks with 2 xt90's each. Right now I'm hearing this little gem up to do some 6.5mm Castle bullet connectors and I expect it will be a breeze. Temp control works well but the dial seems a bit fragile. Use care when turning it or storing the iron. Dont wrap the power cable around the body of the iron, at best you will lose your setting and you may possibly damage or destroy the dial. That is my only complaint about this iron.*update*I've been using this iron for nearly a year and it is still holding up. I have had a few bonehead moments of leaving it on unattended for fairly long periods but my solder station holds the iron safely away from anything that could be burned or damaged. All that happened is I ruined a couple tips. Luckily replacement tips are readily available, and this iron uses a very common type of tip. That means it is easy to upgrade to a brand-name or other high quality soldering tip in your favorite shape. Doing so has made this iron perform much better even than when it was new for me. It seems like at least once a week I'm using this iron to change out battery connectors on my RC cars as well as the batteries themselves. I've become the go-to guy in ny RC friends circle for soldering. The analog dial leaves a bit to be desired, as it seems to read a higher temp than the iron is really putting out

I plugged it in and it works. Really can't expect much more from 10 dollars. Temperature seems to work, but I'm not certain. Used it to remove a battery from an electric toothbrush and it seems to operate just fine. I have two more item to fix over the next month and will update this review if necessary.update - Still works well and temperature is definitely adjustable. I had to increase the temperature to remove the battery form my 7110x razor. This iron is a good deal! I will update this review if the iron fails in the next few months.

Would have given 5 stars if it had an actual stable stand to put the hot iron

I can tell this is a good product but it didn't serve the purpose I needed

Pretty basic iron. It does get up to temperature in under a min. Already have some decent irons and just got this a a backup or for some light duty stuff. At around $10 it's fine for something this cheap but so is the quality. OK for an occasional repair.The temp control is very inaccurate. Even at the lowest setting of 200°C it's can still melt ROHS unleaded solder. I like being able to lower the temp when the iron is going to be idle for a few minutes, saves wear on the tips. But this iron makes that redundant. And you really want to use some tip tinner on first use, the chromium plating layer doesn't look like it will last very long and needs to be cleaned/re-tinned constantly. It has a red indicator light built into the white body of the handle. In good lighting that light may not be as noticeable and I plan to put an in-line switch into the cord as a safety measure.

The media could not be loaded. It’s gets Smokey Luke a soldering iron and gets very hot so get some gloves that will keep your hands from burning and the size is great the build quality is great thank you amazon!! 5/5 stars it also came very quick

I was skeptical when I opened the shipping package and first saw the little box. After opening it and inspecting the contents, I decided that if it heated upto specs then it was everything I needed. My first project was to remove and install new potentiometers in an electric guitar. The iron eated up instantly and was easy to use and produced excellent results. If it lasts then it is worth twice the price! Highly recommend!

Does everything it needs to, nothing more nothing less.