WirthCo Funnel King 32400 3-Quart Drum Funnel with 2" Thread, Polyethylene - Made in USA

Nice solid funnel large enough to pour oil from a pan into it without spilling. It’s great that the threaded end can be changed! I modified it to fit a 3/4in Hedpack 5 gallon container and it works perfectly. With a PVC 1” to 3/4” adapter and a 3/4” nipple it is totally solid. I was able to fill the funnel to the top without any wobble or fear it might break. I even managed to force a garden hose filter into the bottom end which was difficult since I had to cut the lid to open the spout and then rethread that end to accept it, but it worked. I also ordered a couple extra lids so I have one to close it air tight and another in case I want to modify it differently. Overall it’s exactly what I needed.

It's hard to find such a big funnel. These are nice, the size is good if you need a big funnel. The funnel held up well for our application. We caulked the top of it to a piece of plywood using some pretty tough glue. And when we needed to remove it later we could do that without damaging the funnel. The bottom of it is a separate pice, so there is the potential for leakage to happen in that location. We didn't have leak problems there, but you could caulk that joint if you wanted to be sure. Amazon sells the right parts to hook it up to a regular garden hose. I tried getting those from the hardware store, but they didn't have what I needed in one part, so I needed to buy multiple parts that altogether cost a lot more than the exactly-what-you-need-and-nothing-more part that Amazon sells.

I am one of the most frugal people on the planet. So, when I saw the sale price on this funnel, I couldn't resist. Best of all it fits and it seems to be exactly what I needed to pour water into the blue barrel for my garden. I wish the company made other products, I would gladly buy them as well. The plastic is heavy duty and works for these blue barrels. From other reviews, I believe they work on metal 55 gallon drums also.

Bought one of these 4 years ago. I accidentally cracked it while removing it from the support I mounted it to. Never once was I let down by this unit. Replaced with a brand new one. Great product.

Super helpful for groundwater sampling, can’t believe it took me as long as I did to use something like this.

Nicely made

I bought the drum funnel because I wanted a threaded large throat funnel. The funnel was ok. It is a cheap molding with several surface imperfections. The injection molding tool used to make the funnel is in pretty bad shape. There is a 3mm ridge inside the funnel for 360 degrees. I don't know why. The funnel orifice is about 1" despite the 2" NPT fitting. The funnel is an assembly of a simple PE funnel and a 2" to 1" NPT reducing coupling. A black plastic fitting is jammed into the bottom of a straight funnel to "give" it threads. It is just jammed in. It does not seal. Oil will leak in the tread root of the fitting that is jammed into the funnel bottom and drip outside the funnel. I wanted the 2" opening as shown in the drawing. I had to heat the funnel and thermoform the orifice to a 2" ID and schedule 40 2" pipe OD. I tossed the cheap plastic fitting out. I bought a new ABS 2" NPT to 2' socket adapter. ($2.00) and bonded the fitting to the modified funnel. I now have a quart PE funnel with a real 2" npt fitting for ~$14.00, but I had to rebuild it. ---added note---I bought a second funnel and modified it also.--- I consider this funnel kind of crappy as is. But I expected it to disappoint me. It served as adequate raw material for me to make a real 3 quart funnel with a 2" exit orifice with a 2" NPT fitting. OK, so it is 3 quart. It is a 2-piece assembly. The bottom orifice is 1" diameter The joint between the 2 pieces leaks by design.

Nice size heavy duty

Alles ok

Me sirvió para lo que quería, se me hizo caro nada mas

Ça fait parfaitement sir ce que je utilise

Baril huile

Worked good for what we needed it for. Made it easier to keep the area clean of mess.