MIG/MAG Gasless Welder - 120 A The control panel of the FCAW (flux-cored arc welding) device is very user-friendly, making it easy to operate. As with many MIG/MAG welders, the wire feeder is operated using a continuously adjustable dial with which you can set the speed to between 1 and 10, according to your needs. The flux core welder is extremely compact. All of the cables are integrated into the device and can be used immediately. The spool for the flux-cored wire is mounted inside the housing and the wire is fed to the torch from there. The wire used should have a diameter of 0.8 or 0.9 millimetres. The housing is equipped with a handle, making the welder especially easy to carry for mobile use. Because there is no shielding gas required, you can also use the transformer-based machine outdoors, even in windy conditions. The flux welder has a powerful fan for optimally regulating the operating temperature. However, if the device does get too hot, the overheat protection ensures the required safety during operation. Technical Details Model S-MAG 120 FLRated input voltage 230 VInput frequency 50 HzWire type Cored wire (flux)Wire feeder InternalWire speed 0 - 10Diameter, wire spool 100 mmDiameter, wire 0.8 - 0.9 mmMax. input current 21.6 AMax. input power 4.9 kVAWelding current 40 - 120 ADuty cycle 10 % Welding current at 100 % 40 AWelding current at 60 % 60 AWelding current at 10 % 120 APower factor 0.96Length, ground cable 2 mLength, torch cable 1.7 mLength, power cable 1.9 mCooling system FanProtection class IP21 Delivery Contents Gasless welder S-MAG 120 FL2 M5 30 mm screws2 M5 nutsMIG nozzle3 MIG contact tips (0.8/0.8/0.9 mm)Gas diffuserInstruction manual
Trustpilot
Hace 1 mes
Hace 2 semanas
