RYANSTAR Samurai Sword Automatic Shift Knob Universal Compatible with Lock/Button Automatic Transmission，Cool Katana Gear Shifter Metal Weighted Black&Red

Great product and definitely worth the purchase! Took me a while to figure it out. Wish it came with instructions! Use 8 screws at the bottom of the base of ur shifter pole. Tighten evenly on each side so base is secure and even. The bolt didnt fit inside the hole on shifter pole so i used a pointy screw to stab against where the hole in shifter lined up. Insert spring. This was the tricky part for me, the plastic piece that pushes down the button was too long on mine . i had to use the short screw attachment inside the handle all the way and then i had to do maybe a quarter turn back. Its tricky i actually took that plastic piece and rubbed it on the pavement until it was sanded down enough. If it wasnt placed just right/ in line it either wont go down far enough to shift or its not up high enough to remove key from ignition.. I would recommend not screwing in both sides of the screw on top. Just get it to fall close enough in line that you can smoothly put in one screw and test it. Than once you figure it out put the screw in the other side and tighten it all down. Should be good to go. This shifter fixed the issue i had with my old shifter. Should work for any car with push button. Hope you dont struggle as much as i did. Great buy. Sorry i shoulda made a video (Edit:) After a while with the shifter the more i used it the less the screw on the inside wanted to stay perfect where i needed it so i just tightened the 2 screws i had in the handle so they locked the little plastic piece into the handle which is better than how i had it originally. Only down side haha is when im moving too quick like if i slam my car into park the spring will launch the handle out because i just have it set in loose. But it slides right back into place easily and everything is very sturdy/well made. Not positive how long ive had it but i still love it! Great purchase, looks good, and functions great. I hope this helps someone. WORTH BUYING 100% Another side note, eventually the plastic peice I had ended up breaking so I ended up taking my grinder and cut off a piece from the end of a drill it I had laying around to use to push the button in order to shift. (should be able to use anything that will fit in the hole)

It looks great everyone gives me compliments I love it easy to install

This thing looks so cool in my Jeep. I did have to glue it on because the set screws kept backing out making the shifter lose, but other than that, this rocks.

So first off, this is a great product it both looks and feels great in my car, (2021 Toyota Corolla SE Nightshade). I have used other shifter knobs before, and I can honestly say that this one is built better, it has 8 total screws securing the base, as opposed to my others which had 3-4. But before you buy this, make sure that the size will fit, my shifter is slightly angled forward, and the top of the handle is very close to the area with the stereo. Now onto how to install it, it is not super difficult, but there are no instructions that come with it, so this is for anyone who needs a little help. 1.) once you have removed your stock shifter knob, grab the largest of the black screws from the bag, and just twist them into the holes on the lower half of the black part with the 8 holes on it. 2.)place that over your shift rod, and tighten them equally and I cannot stress this enough tightly. 3.)place the spring inside of the black piece around your shift rod. 4.)The big silver screws go into the bottom of the handle, you need to experiment and find out which one is going to work best for your car. 4a.) you need to adjust the silver screw so that handle is able to be pressed down so that the four screw holes on the side line up with the slit on the side, and make sure that silver screw is just resting on top of your shift lock button thingy 5.) once you have that lined up, its a little tricky, but you have to screw in the screws through the slit on the side, and into the holes on the side of the handle, make sure you use the screws with the pointed ends for this. 6.) just to be safe go back over and make sure everything is as tight as it can be, and doesn't jiggle or turn when you grip it

It’s nice and sturdy, but it’s very hard to install onto the car. There’s no instruction manual and my key got stuck in the ignition because it didn’t give clear instructions on how to properly set it.

Really cool product, fun to shift gears now! Unfortunately it doesn't come with instructions, so I had to watch a youtube video to install it. Other than that, it was fairly easy to install, only took about half an hour. Definitely recommend! (Got this for my 2013 Accord)

I don't know why everyone is saying it's easy to install. Might just be my car (2004 Sonata), but it's the complete opposite of easy. POS broke my gear shifting mechanism, can't get it out of neutral or drive. It SHOULD be easy to install, but it's not. Highly regret this purchase.

the item was easy to install on my automatic Mazda 3 and it works like a charm. The only complaint is that there is still a bit of "play" from the provided metal harness to the shift. The harness itself is snug fitting but u can wiggle the Katana still a bit around. Also despite the looks it feels really plastic, but thats to be expected. Overall it does what it claims to do and at a good price.

I bought this because the last one I bought didn’t have the right fitting. And this one had a cheap faux leather wrapping, so I replaced the wrapping myself with fabric.

There is no instruction how to install it so you have to figure out which didn’t take too long. Mine was too long and I felt a bit too much now lol. Overall it looks great, you may need a shift cover to make it look nice.

Only took 25 minutes to install, faster if I knew how from the start lol Edit: it's been over 6 months and the product is still functioning properly with no cons.

Missing parts

説明書はありませんでしたがそんなに難しいものではないのですぐに取り付け出来ました。 軽トラのatに乗られてる方はほぼ適合すると思われます。 きちんとキーも抜けるので良かったです