NINEO 9005 LED Bulbs w/Small Size,10000LM 60W 6500K Cool White Hb3 All-in-One Conversion Kit

These are very bright compared to original equipment. I own both high and low beams.I first mistakenly ordered low beams instead of high beams, but instead of paying the return shipping decided to install them. I was only able to install one before my first night drive, and the single low beam headlight was so bright I couldn't even pick out the light from the other, original halogen. I can't wait to see both bulbs in action, and the high beams.That said: I had to spend about 15-20 min per bulb whittling away part of the bulb base, and then the back sides of the blades so that it would fit and lock into my headlight enclosures. I scraped away the three dogs that face the enclosure, and beveled the back side of the blades so that the would catch easier when rotating the bulb into the enclosure (and after that, they still just barely fit).I estimate these are about 10% out of size spec compared to original bulbs. Vehicle is a 1995 GMC truck.So, 5 stars for performance, 1 star for fitment, 3 stars overall.

I decided to upgrade all my lights to LED on my 2017 F-150 and went with Nineo2 for low/high headlight and purchased these Nineo2 M2 9005version(smaller) to use in fog lights. I did have to modify the base of the 9005 since it is different from the 9140 and it won't fit without modifications. Needed some trimming to one of the tabs and then it fit perfectly. Photos show the Nineo2 9005 next to the Nineo2 M2 9005. The M2 is smaller, a little less bright but still a whole lot brighter than halogen and also fits better in housing and tt doesn't have a separate ballast as seen in photos. Overall I am very happy with the outcome and with the brand Nineo2 and if I had found the M2 version before I ordered the bigger version for my headlights, I would have just used the M2 for everything. Quality looks and feels good. The collar is adjustable and removable which was useful during the trimming.Just installed them so can't speak on longevity but will keep this updated.

I should start off saying that i purchased the brighter/bigger/more expensive version of these for the Low-Beam, which are worth every penny.I bought these, thinking they had the same 360 Degree of adjust-ability, they do not. Upon installing, noticed the bulbs would sit at a 45 degree angle inside the house in the "fixed/locked-in" position, recommended is 90 degrees.To get there to fit right, had to slightly modify the HB3/9005 base. Quite simple, remove the single Philips head screw under the rubber seal and press the base away from the heat-sink, this wil break the adhesive locking it to the bulb. This will allow you to align and mark the bulbs to allow proper modification/moving of the set screw in the base. Using adhesive to seal the base to the bulb is probably a good idea, to help keep moisture out.Please note, these are NOT compatible with the Daytime Running Light feature of a 2014 Subaru Crosstrek. The DRL feature will operate the bulb at FULL brightness, this is due to the operating voltage supported by these bulbs (9v-32v). These bulbs will require disabling the DRL feature of your car, be warned you will blind oncoming vesicles if you do not.If you are looking to retain use of your DRLs, these bulbs are not for you.However, they do work great when customized to mfg operating spec/orientation...They are easily twice as bright as the STOCK/OEM halogen bulbs.

I am pretty disappointed with these lights, I'm not sure if I got defective bulbs or what because it is advertised as 10000lumens per pair but I have a pair of 8000lms and it is noticeably brighter than these bulbs. Also the light patter is so uneven that it actually bothers me seeing spots that are darker than the rest even after trying different angles (rotating bulb) which was not a problem with my previous bulbs. I understand that these are value bulbs but I do think that the description should be realistic. Am I mad about it? No but am I satisfied with the product? Definitely not. Again, I am not sure if these are just defective or not but definitely something I'd buy again.

I bought both the Nineo II H7 and the 9005 for my 2010 Subaru Outback. They work perfectly, even with the projector low beam housing. Easily twice as bright as a standard bulb. No resistor required just plugged directly into the stock connector. Clean bright white with a very nice light distribution. What is cool about these is they are adjustable without having to use a set screw. You just install them and then twist them to the correct 3 and 9 O'clock. This is very important especially in the projector housing. To test the orientation simply hold a large piece of cardboard about 2 feet away from the light after installation. The low beam should look almost like a cats eye with a dark slit down the middle and then it spreads out nicely in the distance.

Contrary to what it said on Amazon's site, the configuration of the plug is different than that of the plug on the car. I have Nineo II's for headlights (the Mini's work), and they are bright and a good value. That's why I rated these 9005's for that, but you cannot install them without changing the plug, which I wasn't willing to do. You would also have to do some carving on the base of the light itself. And I don't know if the extra wire/plug would fit inside the headlight assembly because I never got that far, but I have my doubts. Good product, but not for a 2016 Elantra.

I installed these in my 2005 Subaru WRX. Installation was easy, they are bright & there are no problems so far. They work perfectly. They have just been installed & will update my review if there are any problems in the future. But no need for a decoder or anything on this model. Now I can see driving back & forth from work in the dark! Yes! I replaced high & low beam & next will do fog lights with this same brand. I read reviews on other brands & it seems there are problems. But no problem here & I am happy with my purchase.

Great bulb,easy to install but no instructions as to how to rotate bulb for proper alignment ,disappointing.